 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NEW SC-Type Optical Fixed Attenuators HSC-AT11CS Series sFeatures 1. Low return loss, 60 dB min.* 2. Complies with Telcordia GR-910-CORE. 3. High input power (250 mW max.) 4. Variety of fixed attenuation levels. sOrdering Information HSC - AT - 11 - CS - A - ** 1 2 3 4 5 6 CS: APC (>=60dB) 1 Series name: HSC 2 Attenuator 4 Polishing code sApplications 1 to 16 dB (in 1 dB increments), 20, 25, and 30 dB Optical communication and data transfer equipment requiring in-line fixed power level adjustment. 5 Optical fiber type A: Single Mode SC connectors A: 10, 11, 12, 13, 14, 15, 16, 20, 25, 30 3 Specification series 6 In-line mating with a standard A: 01, 02, 03, 04, 05, 06, 07, 08, 09, Part Number HSC-AT11CS-A01 HSC-AT11CS-A02 HSC-AT11CS-A03 HSC-AT11CS-A04 HSC-AT11CS-A05 HSC-AT11CS-A06 HSC-AT11CS-A07 HSC-AT11CS-A08 HSC-AT11CS-A09 HSC-AT11CS-A10 HSC-AT11CS-A11 HSC-AT11CS-A12 HSC-AT11CS-A13 HSC-AT11CS-A14 HSC-AT11CS-A15 HSC-AT11CS-A16 HSC-AT11CS-A20 HSC-AT11CS-A25 HSC-AT11CS-A30 CL No. 820-9001-2 820-9002-5 820-9003-8 820-9004-0 820-9005-3 820-9006-6 820-9007-9 820-9008-1 820-9009-4 820-9010-3 820-9011-6 820-9012-9 820-9013-1 820-9014-4 820-9015-7 820-9016-0 820-9017-2 820-9018-5 820-9019-8 Attenuation 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 11dB 12dB 13dB 14dB 15dB 16dB 20dB 25dB 30dB Attenuation Tolerance Return Loss +0.8dB 0.8dB 0.8dB 0.8dB 0.8dB 0.8dB 0.8dB 0.8dB 0.9dB 1.0dB 60dB 1.1dB 1.2dB 1.3dB 1.4dB 1.5dB 1.5dB 1.5dB 1.5dB 2.5dB Wavelength Split Sleeve Fiber Type 1310nm 1550nm Zirconia SM 2004.7 1 sSpecifications Rating Operating temperature range Storage temperature range -40c to +75c -40c to +75c Max. input power Fiber type 250 mW SMF Characteristic Attenuation Return loss Rated input power Optical characteristic Environmental characteristic Mechanical characteristics Test Method (Conforms with Telcordia GR-910-CORE) Measurement at a point within the wavelength of 1310 30 nm and a point within the wavelength of 1550 30 nm. Power : 250mW(LD) Wavelength : 1470nm Duration : 100 hours Temperature : -5c to 50c Duration : 182.5 hours Humidity : 15% to 90% Temperature : -40c to 75c Period of 1 cycle : 8 hours Number of cycles : 21 Low-Temperature Exposure and Thermal Shock Temperature : 23c 40c -40c 23c Duration : 2.1h 72 h 5 min. minimum High-Temperture Exposure and Thermal Shock Temperature : 23c 70c 70c 23c Duration : 1.6h 72 h 5 min. minimum High Relative Humidity Exposure Temperature : 23c 40c 40c 23c Duration : 0.6h 96 h 0.6h Humidity : 90% to 95% Temperature : -10c to 65c Period of 1 cycle : 12 hours Humidity : 90% to 100% Number of cycles : 14 Temperature : 43c Duration : 168 hours Solution : PH 5.5 Vibration frequency range : 10 to 55 Hz Maximum amplitude: 1.52 mm Duration : 2 hours in each of 3 directions Bend angle Load Load : 90 : 1.25 kg : 2 kg Specification Refer to the various types of attenuation tolerance (the previous page). 60 dB min. After / during test, changing in attenuation(fluctuation)shall be less than 0.1dB. Controlled Operating Environment Uncontrolled Operating Environment Non-Operating Environment 1) After test, change in attenuation(fluctuation)and return loss shall be 1) as follows. 1) * Attenuation(fluctuation) : within 0.5 dB 1) * Return loss : 60 dB min. 2) No breakage, crack or dislocation of components. Humidity/Condensation Cycling Test Water Immersion Vibration Side Pull Load 1) After /during test, change in attenuation(fluctuation)and return loss 1) shall be as follows. 1) * Attenuation(fluctuation) : within 0.5 dB 1) * Return loss : 60 dB min. 2) No breakage, crack or dislocation of components. 1) After test, change in attenuation(fluctuation)and return loss shall be 1) as follows. 1) * Attenuation(fluctuation) : within 0.5 dB 1) * Return loss : 60 dB min. 2) No breakage, crack or dislocation of components. Cable Retention Durability Impact Test Insertion/withdrawal cycles : 200 Drop onto a concrete floor from a height of 1.8 m. Cycles: 8 times in each of 3 directions Serial No. * * dB sMaterials and Dimensions 72516 Component Body Ferrule Split sleeve Material Zinc alloy 9.4 Zirconia 35.5 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 2 12.6 Zirconia |
Price & Availability of HSC-AT11CS-A01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |